Industrial Pump Packages

Package 8 | AtEx - Air

Standard Pumps Explosion Proof Drum Pump (AIR) is designed for safely transfer of highly flammable/combustible liquids and meets the stringent safety requirements of the Chemical Processing Industry.

Specifications 
Motor TypeSP-A1
Pump AssemblyStainless Steel 316
Pump Length39" (1000 mm) or 47" (1200 mm)
Hose1,8 m, I.D. 1" (25 mm) AtEx Hose
Dispensing Nozzle1" (25 mm), Stainless Steel 316
Barrel AdapterStainless Steel
Storage BracketSteel
Max. Flow Rate64 LPM based on water
Max. Viscosity750 cps (mPas)
Max. TemperatureAtEx 40° C (non-AtEx Application: 80° C)

Applications

  • Alcohol
  • Isopropyl Ether
  • Aqueous Ammonia
  • Xylene
  • Petroleum Products
  • Gasoline
  • Toluene​
  • Solvents
image
Pumping of flammable or combustible liquids can generate a static electric discharge, causing fire or explosion resulting in injury or death. Read and understand operating instructions before starting this unit. Follow all federal, state and local safety codes including NFPA 30 - NFPA77. Prior to connecting to air supply, install bond and ground wires and check continuity of each wire. A meter reading of one ohm or less is required for safe liquid transfer. Use only approved metallic pump tube, explosion proof or air motor, metallic drum and receiving vessel when pumping flammables. Air motors are not recognized under any current Underwriter’s Laboratory listing program. Consult a qualified engineer for suitability for use in a hazardous area or on flammables.