Home | Industrial Drum Pumps | Industrial Pump Tubes | SP-MINI Series
Industrial Pump Tubes
SP-MINI Series
Pump Design: Seal-less / Centrifugal
Discharge Option: ½” (12,7 mm) Hose Barb
Wetted Parts: Polypropylene, Carbon Graphite, Hastelloy C-276 (SP-M-PP)
Motor Drive Options: SPE-12V/24V Series, SPE-250B or SPE-450 Series
Max. Viscosity: 250 cps (mPas) (SPE-250B)
Max. Discharge Pressure: 6.0 psi (0,41 bar)
Max. Flow Rate: 20,8 lpm
Max. Temperature: 55° C
Duty Cycle: Intermittent
Applications
- Corrosive chemicals
- Acids
- Alkalies
- Life Sciences
- Organic Compound
Technical Docs
Pumping of flammable or combustible liquids can generate a static electric discharge, causing fire or explosion resulting in injury or death. Read and understand operating instructions before starting this unit. Follow all federal, state and local safety codes including NFPA 30 - NFPA77. Prior to connecting to air supply, install bond and ground wires and check continuity of each wire. A meter reading of one ohm or less is required for safe liquid transfer. Use only approved metallic pump tube, explosion proof or air motor, metallic drum and receiving vessel when pumping flammables. Air motors are not recognized under any current Underwriter’s Laboratory listing program. Consult a qualified engineer for suitability for use in a hazardous area or on flammables.